| View previous topic :: View next topic |
 |
Author |
|
| Message |  |
|
Zarge
Newbie
Joined: 16 Jul 2009
Posts: 6
|
 Posted: Sun Sep 27, 2009 6:08 pm Post subject: H6016 charge Li-Po and get a connection break |
 |
I have a problem with my batteries or the charger. To often when i ballance the batteries i get a error on H6016. CONNECTION BREAK.
I have changed to deans plugs. I always ballance the batteries.
I got four Yeah racing Li-Po racing pack, 3200mAh:http://www.rcmart.com/catalog/rc-batterylipo-yeah-racing-cb0184-combo-lp0032-lipo-batter-p-28600.html?cPath=52_973
I have uploaded some pictures to http://hekta.org/~evenho/bilder/RC%20hobby/error/. One of the pictures shows that it is 2.64volt over one cell. That happend when i charged the batteri and got connection error at 7,4volt (total). I used H6016 to discharge the batteri when the low voltage error apeared  Is it dangerous to charge the batteri again?
Do any one have the same problem with the H6016 og batteries?
What is wrong when i get CONNECTION ERROR? |
|
| Back to top |
|
 |
rcmary
Site Admin
Joined: 07 Nov 2007
Posts: 41
|
| Posted: Tue Sep 29, 2009 1:31 am Post subject: |
|
Hello:
Do you have "Battery Vol Err Cell Low Vol" Message of any Batteries?
Thanks! |
|
| Back to top |
|
|
Zarge
Newbie
Joined: 16 Jul 2009
Posts: 6
|
| Posted: Tue Sep 29, 2009 5:29 am Post subject: |
|
If you see the pictures i have uploaded, you can se that i have "Battery Vol Err Cell Low Vol" Message. It happend after i charged the battery and got "connection error" and i wanted a full batteri so i discharged the battery. It was there i got "Battery Vol Err Cell Low Vol" Message. |
|
| Back to top |
|
|
dinballian
Site Admin
Joined: 06 Nov 2007
Posts: 30
|
| Posted: Mon Oct 05, 2009 10:58 am Post subject: |
|
Thank you for your enquriy.
I feel very sorry for the late reply, because we have holiday on the last few days.
Have you try to change another battery, is there same problem occur? 
Thank you. |
|
| Back to top |
|
|
Zarge
Newbie
Joined: 16 Jul 2009
Posts: 6
|
| Posted: Thu Oct 08, 2009 8:52 pm Post subject: |
|
Thats no problem. I only hope we can find the problem i have.
I dont know if anyone in my rc club will let me charge their batteries, but i can ask.
I have tryed to charge one battery on another charger and he good connection break on the battery.
Should light kit make any uneven on the battery cell?
How different can the cell volt on the battery be? Like 3,20V on cell one and 3,40 on cell two? More or less?
Is it any problem when i get "CONNECTION BREAK" to just start charging it again? |
|
| Back to top |
|
|
Zarge
Newbie
Joined: 16 Jul 2009
Posts: 6
|
|
| Back to top |
|
|
|
Go Shopping!
